system trace
system trace
To configure a system trace level, use the system trace command. To remove the system trace level
configuration, use the no form of this command.
Syntax Description
bit-mask
Defaults
None
Command Modes
Global configuration mode (config)
Supported User Roles
network-admin
vdc-admin
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure a system trace level:
switch(config)# system trace
switch(config)#
This example shows how to remove the system trace level configuration:
switch(config)# system no trace
switch(config)#
Related Commands
Command
show cores
Cisco Nexus 7000 Series NX-OS System Management Command Reference
422
system trace bit-mask
no system trace [bit-mask]
Bit mask to use to change the trace level of the system.
Modification
This command was introduced.
Description
Displays the system core files.
S Commands
OL-25806-03