Got Side Settings; Setting Communication Interface (Communication Settings); Communication Detail Settings - Mitsubishi Electric GOT1000 Series Connection Manual

5.3 GOT Side Settings

5.3.1 Setting communication
interface (Communication
settings)
Set the channel of the equipment to be connected to the
GOT.
2.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: MODBUS
• Controller Type: MODBUS
• I/F: Interface to be used
• Driver: MODBUS/TCP, Gateway
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.

5.3.2 Communication detail settings

Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting].For details,
refer to the following.
1.1.2 I/F communication setting
5.3.2
Make the settings according to the usage environment.
(1) GT16, GT14
3.
4.
Item
GOT NET No.
GOT PLC
*2
No.
GOT
IP Address
Click!
Subnet Mask
Default
Gateway
*1
Ethernet
Download Port
*1
No.
GOT
Communication
Port No.
Startup Time
Timeout Time
Delay Time
32bit Storage
5. MODBUS(R)/TCP CONNECTION
Communication detail settings
Description
Set the network No. of the GOT.
(Default: 1)
Set the station No. of the GOT.
(Default: 1)
Set the IP address of the GOT.
*1
(Default: 192.168.3.18)
Set the subnet mask for the sub
network.(Only for connection via
router)
*1
If the sub network is not used, the
default value is set.
(Default: 255.255.255.0)
Set the router address of the
default gateway where the GOT is
connected.(Only for connection via
router)
(Default: 0.0.0.0)
Set the GOT port No. for Ethernet
download.
(Default: 5014)
Set the GOT port No. for the
connection with the Ethernet
module.
(Default: 5020)
Specify the time period from the
GOT startup until GOT starts the
communication with the PLC CPU.
(Default: 3sec)
Set the time period for a
communication to time out.
(Default: 3sec)
Set the delay time for reducing the
load of the network/destination
PLC.
(Default: 0ms)
Select the steps to store two words
(32-bit data).
(Default: LH Order)
5.3 GOT Side Settings
1
2
3
Range 4
1 to 239
1 to 247
0.0.0.0 to
255.255.255.255
5
0.0.0.0 to
255.255.255.255
0.0.0.0 to
255.255.255.255
6
1024 to 5010,
5014 to 65534
(Except for 5011,
5012, 5013 and
49153)
1024 to 5010,
5014 to 65534
(Except for 5011,
7
5012, 5013 and
49153)
3 to 255sec
3 to 90sec
8
0 to 10000
( 10 ms)
LH Order/HL Order
5 - 3