Got Side Settings - Mitsubishi Electric GOT1000 Series Connection Manual

8.3 GOT Side Settings

8.3.1 Setting communication
interface

Controller setting
Set the channel of the equipment to be connected to
the GOT.
2.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set Manufacturer, Controller Type, I/F, and Driver
according to the connected equipment to be used.
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting]. For details,
refer to the following.
1.1.2 I/F communication setting

Fingerprint authentication device setting
3.
1.
Select [Common]
[Fingerprint Authentication] from the menu.
2.
4. Set the interface to which the fingerprint
authentication device is connected.
Click the [OK] button when settings are completed.
POINT POINT POINT
(1) For communication interface setting
Click!
(2) Communication interface setting by the Utility
(3) Precedence in communication settings
8. FINGERPRINT AUTHENTICATION DEVICE CONNECTION
2.
[Peripheral Setting]
For the fingerprint authentication device
connection, use the channel No.8 of standard
interface.
The following external devices, which use Channel
No.8, cannot be connected at the same time.
• RFID controller that uses the external
authentication
• Barcode reader and RFID controller that require
the power supply
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following
manuals.
GT16 User's Manual (Hardware)
GT15 User's Manual
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
8.3 GOT Side Settings
1
2
Click!
3
4
5
6
7
8
8 - 3