Bosch HEI7052U Installation Instruction page 10

Hide thumbs Also See for HEI7052U:

Available languages

Install 2 screws through holesintrimandinrange backwall. S ee Figure 6:Back-

wallTrimStripandFigure 7:Install B ackwall TrimStrip

Backwall

Trim Strip

Figure 6: Backwall Trim Strip

Figure 7: Install Backwall Trim Strip

Connect Electric - Range

Cord

Install Strain Relief

Note: In Canada, the range is shipped from the factory with the range cord

already installed. Continue to "Complete the installation" on page 15.

For installations other than those in Canada, connect the range cord at the termi-

nal block (See next page for detailed instructions). Access the terminal block by

removing the cover in the lower right hand corner of the range back panel.

_Warning:

The strain relief provided with your range cord must be properly

installed.

Place strain relief in knockout below terminal block. See Figure 8: Strain Relief

Knockout. Feed range cord through hole and strain relief up to terminal block.

Allow for slack in the cord between the strain relief and terminal block. Once cord

English 8

Table of Contents