Toshiba MMU-AP0072H2UL-1 Service Manual page 108

No. Part name
1. Detachment
Float switch
9
assembly
1) Carry out works of Detachment of
2) Remove the fixing screw and then remove the
2. Attachment
1) Mount the float switch assembly as before with
NOTE :
When mounting, match hole of the float switch
assembly with projection of the drain pan.
2) Mount the bell mouth and fan guard as before.
3) Following to works of Attachment of 7 and
1. Detachment
Drain pan
10
1) Carry out works of Detachment of
2) Remove the wiring cover by removing the
3) Remove the wiring box by removing the fixing
4) Remove the fixing screws to remove the drain
2. Attachment
1) Fix parts as before in order of drain cap →
2) Following to works of Attachment of
3) Attach the wiring cover and then attach the
4) Following to works of Attachment of 4 ,
Procedure
works from 1) to 7).
float switch assembly. (M4,0.98" (25 mm), 1 pc.))
the fixing screw.
(M4, 0.39" (10 mm), 8 pcs.))
works from 2) to 5), attach the parts as before.
and works from 2) to 7).
fixing screws. (M4, 0.31" (8 mm), 2 pcs.))
screw. (M4, 0.39" (10 mm), 1pc.))
pan. (M4, 0.39" (10 mm), 4 pcs.))
drain pan → bell mouth → wiring box.
works from 2) to 4), attach parts as before.
electric parts box cover as before.
attach the parts as before.
and
7
Projection of drain pan Projection of drain pan Projection of drain pan
, ,
4 6 7
and
7
108
Remarks
Float switch assembly Float switch assembly Float switch assembly
Fixing screw
Fixing screw Fixing screw
(Ø4 × 0.98" (25mm)) ( (Ø4 4 × 0.98" ( 25)m)) 0.98" ( 25)m))
.3 .3
Hole of float switch assembly Hole of float switch assembly Hole of float switch assembly
Fixing screws (Ø4 4 ×10) Fixing screws (Ø4 × 0.39"(10mm)) Fixing screws ( 10)
Fixing screws ( Fixing screws (Ø4 4 ×10) Fixing screws (Ø4 ×10) 10)