D-Link AC1900 User Manual page 36

Section 4 - Con guration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your Internet Service
Provider (ISP) uses a PPTP connection. Your ISP will provide you with a
username and password.
Enter the PPTP server IP address provided by your ISP.
PPTP Server IP
Address:
Enter the username provided by your ISP.
Username:
Enter the password provided by your ISP.
Password:
Select either
Reconnect Mode:
Enter a maximum idle time during which the Internet connection is
Maximum Idle
maintained during inactivity. To disable this feature, select
Time:
on as the reconnect mode.
Advanced Settings
Select Static IP if your ISP assigned you the IP address, subnet mask,
Address Mode:
gateway, and DNS server addresses. In most cases, select Dynamic IP.
Dynamic IP
Enter the primary DNS server IP address assigned by your ISP.
Primary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP.
Secondary DNS
Server:
Maximum Transmission Unit - you may need to change the MTU for
MTU:
optimal performance with your ISP. The recommended setting is
D-Link DIR-878 User Manual
PPTP
, On demand, or Manual.
.
32