D-Link AC1900 User Manual page 43

Section 4 - Con guration
Advanced Settings - Address Autocon guration Settings
Enable or disable the Automatic IPv6 Address Assignment feature.
Enable Automatic
IPv6 Address
Assignment:
Enable or disable DHCP-PD for other IPv6 routers connected to the
Enable Automatic
LAN interface.
DHCP-PD in LAN:
Note: This feature requires a smaller subnet pre x than /64 (i.e. allowing
for a larger address allocation), such as /63. Contact your ISP for more
information.
Select
Autocon guration
Type:
If you selected
Enter the router advertisement lifetime (in minutes).
Router
Advertisement
Lifetime:
If you selected Stateful DHCPv6 as the Autocon guration Type:
Enter the starting IPv6 address for the DHCP server's IPv6 assignment.
IPv6 Address
Range (Start):
Enter the ending IPv6 address for the DHCP server's IPv6 assignment.
IPv6 Address
Range (End):
Click Save when you are done.
D-Link DIR-878 User Manual
Auto Detection (continued)
or as the Autocon guration Type:
or Stateful DHCPv6.
39