Wireless - D-Link AC1900 User Manual

Section 4 - Con guration
From this page you can con gure your wireless network settings.
Smart Connect
Enable or disable the Smart Connect Feature. When enabled only
Smart Connect:
a few con guration options are available to simplify con guration.
Create a name for your wireless network using up to 32 characters.
Wi-Fi Name (SSID):
Create a password to use for wireless security. Wireless clients will
Password:
need to enter this password to successfully connect to the network.
Advanced Settings
Choose None or
Security Mode:
Select the desired wireless transmission power.
Transmission
Power:
Use the drop-down menu to select the time schedule that the rule
Schedule:
will be enabled on. The schedule may be set to
you can create your own schedules in the Schedules section. Refer
to Schedule on page 81 for more information.
Wi-Fi Protected Setup
The easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup
(WPS). Using WPS-PIN disabled by default due to security vulnerabilities.
Enable or disable WPS-PBC fuctionality.
WPS-PBC Status:
Enable or disable WPS-PIN fuctionality.
WPS-PIN Status:
Refer to the next page if you wish to disable Smart Connect or click
Save when you are done.
D-Link DIR-878 User Manual

Wireless

recommended).
, or
59