System Admin - D-Link AC1900 User Manual

Section 4 - Con guration
This page will allow you to change the administrator (Admin) password and
enable remote management. In the Management menu on the bar on the top
of the page, click . To load, save, reset settings, or reboot the router, click
System and refer to Schedule on page 81.
Admin Password
Enter a new password for the administrator account. You will need to
Password:
enter this password whenever you con gure the router using a web
browser.
Enables a challenge-response test to require users to type letters or
Enable Graphical
numbers from a distorted image displayed on the screen to prevent
Authentication
online hackers and unauthorized users from gaining access to your
(CAPTCHA):
router's network settings.
Advanced Settings - Administration
Check to enable HTTPS to connect to the router securely. Instead of using
Enable HTTPS
Server:
order to connect to the router.
Remote management allows the DIR-878 to be con gured from the
Enable Remote
Internet by a web browser. A password is still required to access the web
Management:
management interface.
The port number used to access the DIR-878 is used in the URL. Example:
Remote Admin
Port:
and 8080 is the port used for the web management interface.
Note: If you enabled HTTPS Server and wish to access the router remotely
and securely, you must enter https:// at the beginning of the address.
Click Save when you are done.
D-Link DIR-878 User Manual

System Admin

, you must use
where x.x.x.x is the Internet IP address of the DIR-878
in
84