GE 845 Instruction Manual page 161

CHAPTER 4: SETPOINTS
845 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
• Select the row in which the dataset item is to be deleted then right click and select the
displayed "Delete FCDA" option.
Figure 4-21: Delete FCDA Option
Number of DAs Counter
Depending on the configured dataset items, the "Number of DAs" counter increases
automatically.
Figure 4-22: Dataset Properties
Maximum Report Control Blocks
The 845 relay supports a maximum of 4 report control blocks. Buffered and unbuffered
reports are both included in the maximum. The user can configure reports based on the
Report Configurations Supported table as follows.
Table 4-33: Report Configurations Supported
Buffered Report
4
3
2
1
Goose Transmission
The 845 relay has an IEC 61850 server and supports the GOOSE message scheme. A
maximum of three GOOSE control blocks can be added. The GOOSE Configuration has two
sections:
• Transmission
• Reception
GOOSE transmission configuration is described in this section.
Unbuffered Report
0
1
2
3
DEVICE
Total Reports
4
4
4
4
4–57