Pioneer Elite KURO PRO 111FD Operating Instructions Manual page 19

Install Your Flat Panel TV
Attach/Detach the Speaker
The flat panel TV's speaker delivers high-quality, clear sound. Although other devices can be added or removed
from the mounted panel, physically attach the speaker last. Disconnect the cables from the Speaker and
REMOVE THE SPEAKER before mounting or moving the panel.
Before attaching the speaker to your mounted panel, review the information below.
• Lay the panel face down on a stable surface when attaching speaker brackets.
• Use only the supplied screws and tighten securely before stepping away.
• Handle the speaker carefully to protect the cabinet and grille net from scratches and other damage.
• Placing a CRT monitor near the speaker can cause a blur on the flat panel TV. Keep the distance between the
speaker and the monitor.
• Connecting these speakers to another panel or device can
• When using tone control to increase treble, avoid over-
Note: Use the foam packing materials to protect the equipment from scratches or other damage during
mounting.
Stand-Mounted Panel
1 ) Attach the appropriate speaker brackets (left and right) to the top and bottom on the back of the speakers
using the supplied screws.
(PRO-151FD)
Speaker bracket (For TOP-Right)
Speaker bracket
(For BOTTOM-Right)
damage the unit or cause a fire.
amplifying the volume.
Screw holes
Screw holes
Speaker bracket
(For BOTTOM-Right)
Place the speaker so its
terminals (bottom) are
facing you.
02
Speaker bracket
(For TOP-Right)
19
En