Wall/Ceiling Mounting - Pioneer Elite KURO PRO 111FD Operating Instructions Manual

Install Your Flat Panel TV
• Before connecting the speakers to the flat panel TV, unplug
• Do not leave speaker cable wires bare and exposed at the
• Do not connect any devices to the speaker terminals other

2.3 Wall/Ceiling Mounting

Lay the 50" panel down on a raised surface then remove the stand.
PRO-151FD with the speaker installed
Black
Black
Cable clamp
Speaker cable
the panel from the power outlet. Connecting the speaker
cable with the power cord plugged in can cause
malfunction or damage to the panel if the cable's bare wire
touches other equipment. Plug in the power cord after
connecting the speakers.
terminals. Exposed wires can result in an electrical short
causing malfunction or damage to the system.
than the speakers specified.
Gray
Red
Cable clamp
Installation bolts (1)
Installation bolts (2)
02
(PRO-111FD)
23
En