Basic Operations For Television Viewing
03
Blue LED Dimmer
Adjust the brightness of the POWER ON indicator depending on the brightness level of the viewing area. Setting
to Auto toggles the brightness of the indicator between High, Mid and Low to match the brightness level of the
viewing area. To set the indicator, follow the directions below.
1 ) Access the
Blue LED Dimmer
2 ) Select
Auto, High, Mid
3 ) Select
4 ) Press HOME MENU to exit the menu.
3.4.2 General Picture (Video) Adjustment for an AV Source
The directions below apply to all AV sources except OPTIMUM. If the viewing option is OPTIMUM, your flat panel
TV automatically adjusts the picture to the best possible level.
1 ) Access the
2 ) Select an item to be adjusted.
Contrast is used in the example below.
3 ) Use the arrow buttons (/) to adjust to the desired level.
4 ) Press HOME MENU to exit the menu.
Reduce Noise from Analog TV
Sometimes electronic signal static can cause imperfections in the picture. This static is called Video Noise. Your
flat panel TV can reduce video noise from an analog TV channel, depending on the broadcast signal level.
Sometimes the broadcast signal has higher interference levels so that some video noise is noticeable.
This function is only selectable for signals from an antenna. Follow the steps below to reduce noise on an analog
TV channel.
1 ) Access the
Analog TV Setup
2 ) Select
Manual Adjust
3 ) Select
Only analog channels set using Auto Installation are manually adjustable.
Program Entry.
4 ) Select
5 ) Select a channel number to be added.
Use the arrow buttons (
Tuner NR.
6 ) Select
7 ) Select
On.
The default setting is On.
8 ) Press HOME MENU to exit the menu.
46
En
Option
Setup.
through the
from the Option menu.
Low
or
from the submenu.
Picture
through the
Setup.
AV Selection
Contrast
Brightness
Color
Tint
Sharpness
Pro Adjust
Reset
Contrast
System Setup
through the
from the System Setup menu.
from the submenu.
/
) to enter a channel number.
Picture
:
PERFORMANCE
:
40
:
0
:
0
:
0
:
0
32
Setup.