HP 16500B User Manual page 125

waveform
along the
timebase by
varying the
delay value in
the Delay
field. This
action allows
you to control
the portion of
acquisition
memory that
will be
displayed on
the screen. If
you choose,
you can view
the entire
waveform
record in
acquisition
memory. This
is normally
done in single-
shot mode.
pattern mode For the
oscilloscope,
the trigger
mode that
allows you to
set
oscilloscope
to trigger on a
specified
combination
of input signal
levels.
Contrast
pattern
terms.
pattern terms Analyzer
resources that
represent
single states
to be found on
labeled sets of
bits; for
example, an
address on
the address
bus or a status
on the status
lines.
probe field For the
oscilloscope,
the field that
sets the probe
attenuation
factor. For
example, in
the
HP 16532A,
the input
attenuation
can be set
from 1:1 to
1000:1 in
increments of
1.
range terms In the
analyzer, the
range terms
represent
Glossary
Glos sary7