Table of Contents
Advertisement
Initial start-up
3.3 Starting the USM 35X
Switching on
To start the USM 35X, press the switch-on key
The start display of the USM 35X appears; here you
will also see the current software version of the instru-
ment. The instrument carries out a self-check and then
switches over to stand-by mode.
The settings of all function values and the basic set-
tings (language and units) are the same as before
switching-on of the instrument.
3-8
Reset
If any functions can no longer be operated after a warm
start, or if you want to reset the instrument to the basic
setup, then you should carry out a cold start by simul-
taneously pressing the
.
The cold start message "Basic Initialization" is dis-
played. The instrument is initialized and reset to its
basic setup (dialog language: English, for more details
on how to select the language, please refer to chapter 4).
A
Attention:
All saved data are deleted.
Information lines in the startup screen
You can enter two lines (each with up to 39 characters)
for information purposes in the startup screen. For this
use the remote function (codes I1 and I2, refer to chap-
ter 8).
Issue 01, 04/2005
Starting the USM 35X
and the
key.
Krautkramer USM 35X
Advertisement
Table of Contents
