Operation In Static And Dynamic Mode - Siemens SIMATIC Ident System Manual

4.1.7

Operation in static and dynamic mode

Operation in static mode
If working in static mode, the transponder can be operated up to the limit distance (S
transponder must then be positioned exactly over the reader:
Figure 4-7
Operation in dynamic mode
When working in dynamic mode, the transponder moves past the reader. The transponder
can be used as soon as the intersection (SP) of the transponder enters the circle of the
transmission window. In dynamic mode, the operating distance (S
[Operating distances, see Chapter Field data for transponders, readers and antennas
(Page 48)]
Figure 4-8
SIMATIC RF300
System Manual, 07/2016, C79000-G8976-C345-0x
Operation in static mode
Operation in dynamic mode
Planning the RF300 system
4.1 Fundamentals of application planning
) is of primary importance.
a
). The
g
45