Overview; Operation - Bosch MFQ40GB Instruction Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

These operating instructions refer to various 
models. An overview of the different models 
can be found on the illustrated pages. 
(Fig. D)

Overview

Please fold out the illustrated pages. 
Figure 
A:
1 Base unit
2 Power cord
3 5-step switch + fast and
continuous operation 
For switching the appliance on and off 
and adjusting the operating speed.  
0/off = switched off 
1 = slowest speed  
5 = fastest speed 
M =   I nstantaneous switching (maximum 
speed) press to the left and hold in 
place
4 Ejector button
For removing the tools
5 Cable clamp
6 Apertures for inserting the tools
with lock  
Are automatically closed when tool is 
pushed on the rear aperture.
7 Release buttons
For removing accessories from the 
rear aperture. Press both buttons 
simultaneously.
8 Self-closing rear aperture
To insert accessory, e.g. the high-speed 
hand blender, push on the rear aperture 
and hold in place. Rear aperture closes 
automatically when the accessory is 
removed.
Tools
9 Stirrer "Fine Creamer"
Thanks to the special shape of the whisk, 
the mixing result is particularly quick and 
effective.
10 Kneading hook
Depending on Model:
11 Blender jug
12 High-speed hand blender
made of plastic 
13 High-speed hand blender  
made of stainless steel
14 Universal cutter
With the universal cutter use the appli-
ance at full power to prepare honey 
spread (according to the recipe). 
You can find the recipe in the operating 
instructions of the universal cutter.
If an accessory is not supplied as standard,  it 
can be ordered from customer service.
High-speed hand blender: 
plastic 
stainless steel 
Universal cutter: 
When using the accessories, follow the 
separate operating instructions for the 
accessories.

Operation

The closed shape of the housing means that 
the appliance runs especially quietly. Never-
theless, it reaches full motor power and 
speed. An especially good result is achieved 
if the tools are used for the following 
applications: 
Stirrers for...
...sauces, beaten egg white, mashed pota-
toes, crème fraîche, mayonnaise, cream and 
light dough, e.g. cake mixture. Stirrers are 
not suitable for processing heavy dough.
Kneading hook for...
...stiff mixtures such as short pastry, yeast 
dough and potato dough as well as for 
mixing heavy mincemeat dough, pasta or 
bread dough. 
The maximum processing quantity is
500 g of flour and ingredients.
Important information
When the rear aperture is open, the appli- 
ance can be operated using instantaneous 
switching only. Selector switch 1-5  will not 
function. Move slide for actuating  the lock in 
switch position 0/off only.
Overview
order no. 657242 
order no. 657258
order no. 659058 
en
5

Advertisement

Table of Contents
loading

Table of Contents