Table of Contents
Advertisement
When the AP400 is mounted horizontally, the antenna position must be changed (see
chapter 2).
1.11
INSTALLATION PROCEDURES
The installation of an Outdoor Cabinet comprises the installation of:
Adjusting the Antenna position (if necessary).
Mounting the G.729 Daughter Board (if applicable)
Mounting the AP400 against the wall.
Connecting directional antennas, if necessary.
Note: The minimum distance between AP400s (DECT Access Points) must be more
than 1 meter. (However, it is strongly recommended to respect a minimum
distance of 5 meters between the AP400s.)
© NEC Nederland B.V. 2011
Figure 2. AP400 mounted horizontally
Page 16 of 34
AP400 – All Types Installation Manual
Hide quick links:
Advertisement
Table of Contents
