1.12
UNPACKING
PROCEDURE: "Unpacking".
Actions
1.
Open the card board box and take the AP400 out.
2.
Check the AP400 for any damage.
3.
Continue with one of the following Chapters:
When you mount the AP400 vertically, the antenna position will normally be OK,
and when you do not need to install the G.729 Daughter Board, continue with
Chapter 4 MOUNTING THE AP400 AGAINST A
When you mount the AP400 horizontally, you must change the antenna position.
Consult
Chapter 2. ADJUSTING THE ANTENNA
When you require G.729 codec support, you will have to install the G.729
Daughter Board. Consult
DAUGHTERBOARD.
AP400 – All Types Installation Manual
Chapter 3. MOUNTING THE G.729
Page 17 of 34
WALL.
POSITION.
© NEC Nederland B.V. 2011