Checking The Shift Shaft; Checking The Stopper Lever; Installing The Shift Shaft (Fjr13A); Installing The Shift Shaft (Fjr13Ae) - Yamaha FJR13AEV(C) Service Manual

EAS25420

CHECKING THE SHIFT SHAFT

1. Check:
• Shift shaft
Bends/damage/wear → Replace.
• Shift shaft spring
Damage/wear → Replace.
EAS25430

CHECKING THE STOPPER LEVER

1. Check:
• Stopper lever
Bends/damage → Replace.
Roller turns roughly → Replace the stopper
lever.
• Shift lever spring
Damage/wear → Replace.
EAS25450

INSTALLING THE SHIFT SHAFT (FJR13A)

1. Install:
• Stopper lever "1"
• Stopper lever spring "2"
NOTE:
• Hook the ends of the stopper lever spring onto
the stopper lever and the crankcase boss "3".
• Mesh the stopper lever with the shift drum seg-
ment assembly.
1
2
2. Install:
• Shift shaft "1"
NOTE:
Hook the end of the shift shaft spring onto the
shift shaft spring stopper "2".
2
1
3. Install:
NOTE:
Align the punch mark "a" in the shift shaft with
the slot in the shift arm.
ET3P66043

INSTALLING THE SHIFT SHAFT (FJR13AE)

1. Install:
NOTE:
• Hook the ends of the stopper lever spring onto
• Mesh the stopper lever with the shift drum seg-
3
2. Install:
NOTE:
Hook the end of the shift shaft spring onto the
shift shaft spring stopper "2".
5-74
• Shift arm "1"
Shift arm bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
• Stopper lever "1"
• Stopper lever spring "2"
the stopper lever and the crankcase boss "3".
ment assembly.
1
2
• Shift shaft "1"
SHIFT SHAFT
3