Yamaha FJR13AEV(C) Service Manual page 69

Item
Coolant reservoir bracket bolt
Clutch fluid reservoir bolt
(FJR13AE)
Clutch actuator bracket bolt
(FJR13AE)
Clutch actuator bracket bolt
(FJR13AE)
Gear position sensor cover
(FJR13AE)
Gear position sensor screw
(FJR13AE)
Gear position sensor bracket
(FJR13AE)
Shift actuator front bolt
(FJR13AE)
Shift actuator rear bolt
(FJR13AE)
Shift rod bolt (FJR13AE)
Shift rod bolt (FJR13AE)
Shift rod front locknut (FJR13AE)
Shift rod rear locknut (FJR13AE)
Foot shift switch screw
(FJR13AE)
Front shift arm bolt (FJR13AE)
NOTE:
Cylinder head bolt
Tighten the cylinder head bolts to 25 Nm (2.5 m·kg 18 ft·lb) in the proper tightening sequence, loosen
and retighten the bolts to 25 Nm (2.5 m·kg 18 ft·lb) in the proper tightening sequence, and then tighten
them further to reach the specified angle 175–185° in the proper tightening sequence.
NOTE:
Connecting rod nut
Tighten the connecting rod nuts to 20 Nm (2.0 m·kg 14 ft·lb), and then tighten them further to reach the
specified angle 115–125°.
NOTE:
Crankcase bolt
Tighten the crankcase bolts to 20 Nm (2.0 m·kg 14 ft·lb) in the proper tightening sequence, loosen and
retighten the bolts to 20 Nm (2.0 m·kg 14 ft·lb) in the proper tightening sequence, and then tighten them
further to reach the specified angle 115–125° in the proper tightening sequence.
Thread
Q'ty
size
M6 2 7 Nm (0.7 m·kg, 5.1 ft·lb)
M6 1 7 Nm (0.7 m·kg, 5.1 ft·lb)
M8 2 19 Nm (1.9 m·kg, 13 ft·lb)
M6 3 10 Nm (1.0 m·kg, 7.2 ft·lb)
M6 2 10 Nm (1.0 m·kg, 7.2 ft·lb)
M5 2 4 Nm (0.4 m·kg, 2.9 ft·lb)
M5 2 9 Nm (0.9 m·kg, 6.5 ft·lb)
M8 1 20 Nm (2.0 m·kg, 14 ft·lb)
M8 1 20 Nm (2.0 m·kg, 14 ft·lb)
M6 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
M8 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
M6 1 7 Nm (0.7 m·kg, 5.1 ft·lb)
M8 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
M5 2 4 Nm (0.4 m·kg, 2.9 ft·lb)
M6 1 10 Nm (1.0 m·kg, 7.2 ft·lb)
2-20
TIGHTENING TORQUES
Tightening torque Remarks
LT
LT
LT
LT
LT