Yamaha FJR13AEV(C) Service Manual page 646

Hide thumbs Also See for FJR13AEV(C):

Table of Contents

YCC-S (Yamaha Chip Controlled-Shift) SYSTEM (FJR13AE only)

5. Erase the malfunction history in the diagnos-

tic mode. Refer to "Diagnostic code table (Di-

agnostic code No. Sh_ _62)".

Turning the main switch to "OFF" will not erase

the malfunction history.

DIAGNOSTIC MODE

Setting the diagnostic mode

1. Turn the main switch to "OFF".

2. Remove the front cowling left inner panel 1 to access the YCC-S test coupler "1".

3. Remove the protective cap from the YCC-S test coupler.

4. Connect the test coupler adapter "2" to the YCC-S test coupler.

Test coupler adapter

5. Push and hold the hand shift select button "1", turn the main switch "2" to "ON", and continue to push

the button for 8 seconds or more.

• All displays on the meter disappear except the odometer/tripmeter/fuel reserve tripmeter displays.

• "Sh_ _61" appears on the odometer/tripmeter/fuel reserve tripmeter LCD.

6. Select the diagnostic code number corresponding to the fault code number by pushing the hand shift

select button and operating the brake lever (or brake pedal) simultaneously.

7. Turn the main switch to "OFF" to cancel the diagnostic mode.

Chapters

Table of Contents