Radio Disassembly/Assembly
Disassemble Radio
Figure 1-3 Remove Radio Chassis
Figure 1-4 Remove RF Board
Remove Controller Board
1. Remove the PTT lever by slipping a small
screw driver between it and the Monitor Button
and pry it out (Figure 1-5).
2. Remove the two dust covers, that cover the
accessories and cloning connectors, at the
side of the radio.
3. Unlatch the latch levers on the controller
board, and remove the ribbon cable as well as
the flex tail from the connectors (Figure 1-6).
1-2
Figure 1-5 Removing the PTT lever
4. Use a TORX
screw (Figure 1-6).
5. Gently lift the bottom of the controller board to
disconnect
(Figure 1-6).
6. Ease the controller board downwards and lift it
away from the housing.
Figure 1-6 Remove Controller Board
6881086C09-O
GP68 Portable Radios Service Manual
#
®
head screwdriver to remove the
it
from
the
display
board
March, 1997