Erase A Single Channel From Memory; Edit Time Out Timer; Edit Ptt Id - Motorola GP68 Service Manual

GP68 Portable Radios Service Manual
A flashing channel number indicates that the channel is
excluded from the scan list. A channel number that lights
continuously indicates the channel is included in the scan
list. For example, a display showing
its indicates that channel 18 is excluded from the scan list.
Press the Enter Button to toggle the state of a channel
3
in the scan list from included to excluded, or from
excluded to included.
A valid keypress tone sounds when the new set-
ting is stored.
4 To exit the scan list edit mode, select another menu item
by turning the Channel Selector Knob.
NOTE
In a Full Serial Option Board Configured
Radio, the Channel Scan List can be config-
ured to exclude Full Serial Channels from the
Scan List so that conventional channel scan
can function correctly.
Set Accessory Option
Set Battery Type
Set Battery Saver Status
Set Alert Tone Volume
Set Sidetone Status
§
Set SelCall Tone Status
*Edit All Call ID
§ Only displays with option board selected.
To exit this edit mode, select another menu item by turn-
4
ing the Channel Selector Knob.

Edit Time Out Timer

This menu item allows you to select the Time Out Timer
length.
Rotate the Channel Selector Knob to select the 'Edit
1
Time Out Timer' menu item. The menu will display
the current setting:
The default display of
, , ,..., .
the time out timer setting of one minute.
2 Use the or the
Select another menu item by turning the Channel Selec-
3
March, 1997
with flashing dig-
Figure 4-21 Special Programming Mode Options.
, where xxx represents one of
xxx
shows
to change the current status.

Erase a Single Channel from Memory

Rotate the Channel Selector Knob to select the
1
menu item.
2 Use the
(01 to 20).
A flashing channel number indicates that the particular chan-
nel is unprogrammed (erased). For example, a display show-
ing with flashing digits indicates that channel 10 is
erased.
3 To erase a programmed channel (non-flashing channel
numbers), press the Enter Button.
A valid keypress tone sounds when the channel
has been successfully erased.
Pressing the Enter Button for an unpro-
grammed channel (flashing channel num-
bers) results in an invalid keypress tone, and
the keypress is ignored.
(Counter-Clockwise Rotation)
"Beep"
(Clockwise Rotation)
FIRST
Edit Channel Scan List
ITEM
Erase Single Channel
Edit Phone Access Code
†
xxx
† xxx represents
*Edit Acknowledgment ID
*Edit Individual Call ID
*Edit Group Call ID
*
DTMF Decoder board selected.
tor Knob to commit this new setting.

Edit PTT ID

1 Rotate the Channel Selector Knob to select the
menu item.
Press any key (except the Enter Button) to enter the
2
PTT ID edit mode. The LCD displays the currently pro-
grammed PTT ID. For an ID which exceeds the length
of the 6-digit display, the rightmost digit flashes to indi-
cate more digits exist on the right.
You can now change or enter numbers as required, up to a
maximum of 8, using any of the numeric keys, as well as the
∗, #, A, B, C, and D keys. The flashing cursor indicates the
position of the next digit to be entered. You can also enter a
6881086C09-O
Radio Programming Information
Special Programming Mode (SPM)
or the to scroll through the channels
NOTE
Edit Phone De-access Code
Edit Time Out Timer
, , ,...,
Edit PTT ID
Only displays with optional
.
4-11