Dell Edge Gateway 3003 Installation And Operation Manual page 14

NOTE: USB power is limited to 0.6 A/3 W for USB 3.0 port and 0.4 A/2 W for USB 2.0 port to ensure that the Edge Gateway is
within the allowed 13 W PoE Class 0 range.
2. Connect an Ethernet cable to Ethernet port one.
3. Connect the antennas depending on the configuration ordered (optional).
NOTE: The antennas supported in the Edge Gateway vary depending on the configuration ordered.
Table 7. Antennas supported in Edge Gateway 3003
Antennas supported
Signals
14