Bottom View; Left View - Dell Edge Gateway 3003 Installation And Operation Manual

Bottom view

Table 2. Bottom view
Features
1 Earth ground

Left view

Table 3. Left view
Features
1 Intrusion switch
2 Power or ignition port
A large conductor attached to one side of the power supply, which
serves as the common return path for current from many different
components in the circuit.
An intrusion event is triggered when the enclosure (in which the Edge Gateway is
installed) is opened.
NOTE: External enclosure is sold separately.
NOTE: An intrusion event is triggered by a third-party enclosure to the Edge Gateway
through a sensor. The sensor should have a cable that is compatible with the
intrusion switch connector on the Edge Gateway.
Connect a 12-57 VDC (1.08-0.23 A) power cable to supply power to the Edge Gateway.
NOTE: Power cable is sold separately.
NOTE: For marine applications, limit input voltage to 12-48 VDC. The cable length for
rail applications must not exceed 30 meters.
7