Mounting The Edge Gateway Using The Perpendicular Mount - Dell Edge Gateway 3003 Installation And Operation Manual

Mounting the Edge Gateway using the perpendicular mount

NOTE: The perpendicular mount is designed for mounting in a DIN-rail only.
NOTE: An open space of 63.50 mm (2.50 in) around the Edge Gateway is recommended for optimal air circulation. Ensure that the
environmental temperature in which the Edge Gateway is installed does not exceed the operating temperature of the Edge Gateway.
For more information about the operating temperature of the Edge Gateway, see the
1. Align the screw holes on the perpendicular-mount bracket with the screw holes on the Edge Gateway.
2. Tighten the four M4x7 screws to secure the Edge Gateway to the perpendicular-mount bracket.
NOTE: Torque the screws at 8±0.5 kilograms-centimeter (17.64±1.1 pounds-inch).
Edge Gateway Specifications .
41