Mounting The Edge Gateway On The Wall - Dell N01G Installation And Operation Manual

9. If setting up the Edge Gateway for the first time, complete the operating system setup.
NOTE: The Edge Gateway is shipped with Windows 10 Enterprise, Ubuntu Snappy, or Wind River Linux operating
systems.
NOTE: On Windows 10 OS, select
NOTE: The default username and password for Ubuntu-Snappy-Core is
• ubuntu for Ubuntu Core 15.04
• admin for Ubuntu Core 16
NOTE: The default username and password for Wind River is
10. Connect and configure devices using the RS422/RS485 ports.
NOTE: Turn on the corresponding dip switches to enable the RS422/R485 ports.
NOTE: After the Edge Gateway setup is complete, reinstall the dust covers on any unused ports.

Mounting the Edge Gateway on the wall

You can mount the Edge Gateway on a wall by using mounting brackets.
1. Secure the two mounting brackets to the back of the Edge Gateway by using four screws.
22
Do this later when prompted to enter the product key.
root .