Dell N01G Installation And Operation Manual page 49

TPM support (HW TPM module dependency)
Run the root@WR-IDP-xxxx:~# tpm_statistic command displays the status of TPM service.
If the TPM is functional and enabled in the BIOS, below would be the expected results, when tpm_statistic command is
executed.
Expected result: The expected result is for TPM Chip Presence: Normal. Example of the response to the above command should be
similar to the output shown below.
System reboot
To reboot the system, as a root user logged in to the system, enter the root@WR-IDP-xxxx:~# reboot reboot at the
command prompt.
Expected result: System reboots back to the login prompt successfully.
System PowerOff
Run the root@WR-IDP-xxxx:~# shutdown now command to shuts down the system.
Expected result: System shuts down successfully.
Network Interface
To determine the default supported network interface, type the root@WR-IDP-xxxx:~# ifconfig at the command prompt.
Expected result: The following are the default network interfaces supported out of the box.
•
br-lan
•
eth0
•
eth1
49