Mounting the Edge Gateway on a DIN rail
The Edge Gateway can be mounted on a DIN rail. The DIN rail bracket mounts to the back of the Edge Gateway.
NOTE: In some environments where the Edge Gateway is installed, a more robust mounting method is required. For
example, in marine applications, due to vibrations unique to that environment, only a wall mount should be used.
1.
Align the screw holes on the DIN rail mount to the back of the Edge Gateway, place the screws on the DIN rail mount and
secure it to the Edge Gateway.
2.
Pull down on the tab to release the latch on the DIN rail mount.
24