Dell N01G Installation And Operation Manual page 55

Table of Contents

Advertisement

2.
Add apn according to the SIM card operator. For e.g. "3gnet" for China Unicom
root@WR-IDP-XXXX:~# uci set network.wwan.apn="3gnet"
root@WR-IDP-XXXX:~# uci commit network
root@WR-IDP-XXXX:~# uci get network.wwan.apn3gnet
3.
Setup WWAN interface.
restart wwan interface: root@WR-IDP-XXXX:~# ifdown wwan ; ifup wwan
or
restart all interfaces: root@WR-IDP-XXXX:~# systemctl restart netifd
4.
Step 2 and Step 3 can also be performed through in LuCi web interface.
On the WWAN tab. Set APN first, and then click Save & Apply button to apply the changes as shown in the sample LuCi web
interface.
5.
Check the 3g-wwan interface is ready.
root@WR-IDP-XXXX:~# ifconfig 3g-wwan
3g-wwanLink encap:Point-to-Point Protocol
inet addr:10.3.203.207
UP POINTOPOINT RUNNING NOARP MULTICAST
RX packets:238 errors:0 dropped:0 overruns:0 frame:0
TX packets:322 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:35017 (34.1 KiB)
Register Edge Gateway at Intel Developer Hub
The Edge Gateway 5000 series with Wind River Linux IDP 3.1 supports Developer Hub portal within the Edge Gateway. This portal
can be used for performing variety of configuration functions on the Edge Gateway along with using it for developing software layers
on top of the base Wind River Linux OS Image, sensor devices integration to the Edge Gateway and hardening of the combined
application / base OS image for deployment.
The developer portal has to be used for registering the Edge Gateway 5000 at Intel Marketplace to obtain credentials to connect to
the software package update repository. The following are the two key URLs required for developer solutions on the Edge Gateway
using Wind River Linux IDP.
http://shopiotmarketplace.com
credentials for Windshare repository access for package updates.
NOTE: For Edge Gateway with Wind River Linux OS image solution, your (customer's) point of contact should have
already registered your contact information at Intel IoT Marketplace and you should have received notification from Intel
marketplace on procedure for you to get login credentials to Windshare repository from where software packages and
updates to Wind River Linux OS can be obtained. If you have not received notification from Intel IoT Marketplace,
contact your sales point of contact to get you registered.
P-t-P:10.3.203.207
: This is registration site for registering your Gateway device with Wind River Linux and obtaining
Mask:255.255.255.255
MTU:1500
TX bytes:35054 (34.2 KiB)
Metric:1
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Edge 5100Edge 5000 seriesN02g

Table of Contents