Setting Up The Zigbee Dongle - Dell N01G Installation And Operation Manual

Setting up the Zigbee dongle

NOTE: Only Zigbee dongles purchased from Dell work with the Edge Gateway.
CAUTION: Do not connect the Zigbee dongle if the Edge Gateway is installed inside the enclosure.
NOTE: Do not connect the Zigbee dongle to the internal USB port of the IO expansion module.
1. Shut down your Edge Gateway.
2. Connect the Zigbee dongle to any external USB port on your Edge Gateway.
or
Connect the Zigbee dongle to any external USB port on the IO module.
NOTE: Do not connect the Zigbee dongle to the internal USB port of the IO expansion module.
3. Turn on the Edge Gateway and complete the setup.
NOTE: The Zigbee hardware is in a USB dongle, however, it will not function like a Plug and Play application. You will
not see messages appearing on your screen, stating that Zigbee was found. For more information about firmware or
application development, contact Silicon Labs.
NOTE: To find application notes and reference manuals for your dongle, search for the model number ETRX358USB
at https://www.silabs.com
102
9