Table of Contents
Advertisement
Features
7
Cable conduit openings (8)
8
Primary ground (internal)
9
Primary ground (external)
10
Door-stop cables (2)
11
Door thermal ribs
Setting up the enclosure
1.
Install the enclosure's wall-mount bracket at a desired location and secure it to the wall using the wall-mount screws.
NOTE: Ensure that the notch on the bracket is on the top.
NOTE: The wall-mount screws are not included with the enclosure.
2.
Open the enclosure.
3.
Place the enclosure on the wall-mount bracket, and align the tab on the back of the enclosure so that it fits into the notch on
the wall bracket.
Route the cables through the conduits (1 inch and 0.75 inch
diameter).
Connect the grounding cable to the system.
Connect the grounding cable to the system.
Restricts the door from opening.
Dissipates the heat generated by the system.
97
Advertisement
Table of Contents
