Setting Up Your Edge Gateway - Dell Edge Gateway 3002 Installation And Operation Manual

La fonction de sélection de l'indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada.
Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance of 20 cm between the active transceiver and your body.
Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour
un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de
rayonnement et votre corps.

Setting up your Edge Gateway

NOTE: Edge Gateway mounting options are sold separately.
NOTE: Mounting can be done before or after configuring your Edge Gateway. For more information about mounting your
Edge Gateway, see
NOTE: In some environments where the Edge Gateway may be installed, a more robust mounting method is required. For
example, for mounting in marine applications, it is recommended to use only the standard— mount bracket. The
recommendation is due to the presence of vibrations unique to the marine environment.
1. Connect an Ethernet cable to Ethernet port one.
2. Connect the antennas depending on the configuration ordered (optional).
NOTE: The antennas supported in the Edge Gateway vary depending on the configuration ordered.
Table 8. Antennas supported in Edge Gateway 3002
Antennas
supported
Signals
14
Mounting your Edge Gateway.