Can Module - Dell Edge Gateway 3002 Installation And Operation Manual

5. Connect the USB flash drive to the computer.
6. Click Browse and navigate to the location where the Dell ISO recovery image file is saved.
7. Select the Dell ISO recovery image file and click Open.
8. Click Start to begin creating the bootable USB recovery media.
9. Click Yes to continue.
10. Click OK to complete.

CAN module

NOTE: For information about using the CAN module, see the documentation available at www.atmel.com.
The Edge Gateway supports the CANbus model Atmel ATSAME70N19A-CNT. This feature is only supported if the hardware module
is present, and the operating system provides the capability of mutual communication between user space application and physical
module. If there is a specific CANbus programming requirement of user mode application, contact the hardware provider of that
module for the API documentation.
To check if the CAN module is present:
for i in /dev/ttyACM*; do udevadm info $i | grep -q 03eb_2404_USB_CAN_FD && echo "path:
/dev/$(basename $i)"; done
63