Dell Edge Gateway 3002 Installation And Operation Manual page 9

Function
LAN (RJ-45)
NOTE: The power and system status light may operate differently during different boot-up scenarios, for example, when
a USB script file is run during boot-up.
Table 5. Power connector pin definition details
Pin
1
2
3
NOTE: Pin 3 (IG) is connected to the vehicle's ignition status indicator (optional) or a wake pin. A voltage of more than 9
V on the signal indicates that the vehicle's engine is running. The Ignition or Wake pin is used to prevent the draining of
the vehicle battery when the vehicle is turned off for an extended amount of time.
Indicator
WLAN or Bluetooth
Cloud
Link
Activity
Signal
DC+
DC–
IG
Color
Green
Green
Green/Amber
Green
Control
Hardware
Software
Driver (LAN)
Driver (LAN)
Function
12–57 VDC power
Ground
9–32 VDC ignition
Status
Off: WLAN or Bluetooth
module is off
On: WLAN or Bluetooth
module is on
Off: No connection to
the cloud device or
service
On: Edge Gateway
connected to a cloud
device or service
Blinking Green: Activity
to a cloud device or
service
Off: No network link or
cable is not connected
On (Green): High-speed
connection (100 Mbps)
On (Amber): Low-speed
connection (10 Mbps)
Off: No activity on link
Blinking Green: LAN
activity. The blink rate is
related to packet
density.
9