You can now access the snapweb.
Cloud LED On/Off
Cloud LED enables you to visually inspect the operational status of the Edge Gateway by looking at the display light on the left panel
of the Edge Gateway.
1.
To export Cloud LED PIN, run the command:
#sudo su –
#echo 346 > /sys/class/gpio/export
#echo out > /sys/class/gpio/gpio346/direction
2.
To turn on Cloud LED, run the command:
#echo 1 > /sys/class/gpio/gpio346/value
or
To turn off Cloud LED, run the command:
#echo 0 > /sys/class/gpio/gpio346/value
Serial Port
Serial device nodes mapping.
40