Installing front input and output panel
1
Insert the input and output(I/O) panel onto its slot in the system.
2
Slide the panel to secure the hooks into the chassis hole.
3
Tighten the screw to secure the front I/O panel to the chassis.
4
Connect the following cables:
•
intruder switch cable
•
USB 3.1 cable
•
front I/O power cable
•
front I/O power cable
•
USB 3.1 cable
•
speaker cable
•
audio cable
5
Install the:
a
front input and output bezel
b
5.25 inch ODD bracket
30
Removing and installing components