Installing The Processor Heat Sink Module; Removing The Cpu - Dell Precision 7820 Owner's Manual

Installing the processor heat sink module

1 Place the heat sink on the CPU slot.
2 Replace the four screws in the diagonal order (1,2,3,4), to secure the heat sink to the system board.
3 Install the:
a air shroud
b side cover
4 Follow the procedure in

Removing the CPU

1 Follow the procedure in
2 Remove the:
a side cover
b air shroud
c processor heat sink module
3 To remove the central processing unit (CPU):
a Hold the processor heat sink module upside down.
b Pry the two processor carrier latchs [1] from the processor heat sink module.
c Press the other two carrier latchs [2] of the processor carrier and remove it from the slot in the heat sink.
After working inside your computer.
Before working inside your computer.
Removing and installing components 51