Installing input and output panel bracket
1
Insert the input and output(I/O) panel into the metal bracket.
2
Replace the screws to secure the I/O panel bracket to the I/O panel.
3
Install the:
a
front input and output panel
b
front input and output bezel
c
5.25 inch ODD bracket
d
front bezel
e
side cover
4
Follow the procedure in
Intruder switch
Removing the Intruder switch
1
Follow the procedure in
2
Remove the:
a
side cover
b
front bezel
c
5.25 inch ODD bracket
3
To remove the intruder switch:
a
Disconnect the intruder cable [1] from the I/O module.
b Remove the screw [2] that secures the intruder switch to the chassis.
c
Lift the intruder switch and remove it from the chassis.
32
Removing and installing components
After working inside your
computer.
Before working inside your
computer.