Installing front input and output bezel
1
Hold the input and output(I/O) bezel and ensure that the hooks on the bezel snap into the notches on the system.
2
Press the retention tabs and secure them to the chassis.
3
Install the :
a
front bezel
b
side cover
4
Follow the procedure in
5.25 inch ODD bracket
Removing the 5.25 ODD bracket
1
Follow the procedure in
2
Remove the:
a
side cover
b
front bezel
3
To remove the ODD bracket:
a
Remove the ODD filler from the chassis.
24
Removing and installing components
After working inside your
computer.
Before working inside your
computer.