Installing Front Input And Output Bezel; Optical Disk Drive; Removing The Odd - Dell Precision 5820 Tower Owner's Manual

Installing front input and output bezel

1. Hold the input and output(I/O) bezel and ensure that the hooks on the bezel snap into the notches on the system.
2. Press the retention tabs and secure them to the chassis.
3. Install the :
a. front bezel
b. side cover
4. Follow the procedure in

Optical Disk Drive

Removing the ODD

1. Follow the procedure in
2. Remove the:
a. side cover
b. front bezel
3. To remove the ODD:
a. Remove the optical drive data cable and optical drive power cable from the ODD.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 39