2. Replace the screw that secures the front system fan to the chassis.
3. Connect the fan cable to the system board.
4. Route the following cables through the cable holder and connect to the system board:
● SATA and ODD cables
● USB 3.1 cable
5. Install the:
a.
PCIe holder
b.
front bezel
c.
side cover
6. Follow the procedure in
VROC module
Removing the VROC module
Plug-out the VROC module from the system board in the upward direction.
Installing the VROC module
Plug-in the VROC module to the system board.
66
Removing and installing components
After working inside your
computer.