Expansion Card; Removing The Expansion Card; Installing The Expansion Card - Dell Precision 5820 Tower Owner's Manual

Expansion card

Removing the expansion card

1. Follow the procedure in
2. Remove the side cover.
3. To remove the expansion card:
NOTE: For expansion card with VGA power, disconnect the data or power cable connected to the expansion card.
a. Press [1] and rotate the expansion card locking latch backward [2], to unlock the filler bracket.
b. Lift the expansion card [3] from the PCIe slot on the system board.

Installing the expansion card

1. Align and place the expansion card to the PCIe slot on the system board.
2. Press it down so that it is securely seated on the slot.
NOTE: For expansion card with VGA power, connect the data or power cable to the expansion card.
3. Rotate both the expansion card locking latch forward, on the filler bracket, to secure the expansion card to the system
board.
4. Install the side cover.
5. Follow the procedure in
54 Removing and installing components
Before working inside your
After working inside your
computer.
computer.