Installing the slim ODD
1. Slide the slim ODD into the slot on the chassis.
2. Tighten the screw to secure the slim ODD to the chassis.
3. Install the
side
cover.
4. Follow the procedure in
Front input and output bezel
Removing front input and output bezel
1. Follow the procedure in
2. Remove the:
a.
side cover
b.
front bezel
3. To remove the front input and output(I/O) bezel:
a. Pry the four retention tabs[1] from the chassis and push the bezel out from the chassis[2].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
37