Installing An Rhub3908 Power Cable - Huawei DBS3900 Installation Manual

LampSite
Installation Guide
Figure 5-36 RHUB3908 alarm cable
Procedure
Step 1 Connect the RJ45 connector on one end of the alarm cable to the EXT_ALM port on the
RHUB3908.
Step 2 Connect the other end of the alarm cable to the alarm cable port on the device to be monitored.
----End
Follow-up Procedure
1.
2.

5.4.9 Installing an RHUB3908 Power Cable

The RHUB3908 power cable provides 110 V AC/220 V AC power supply for the RHUB3908.
Procedure
Step 1 Route the power cable by referring to Requirements for Cable Layout.
Step 2 Connect the power connector on the X1 end to the AC power input port on the RHUB3908 panel,
as shown in
Step 3 Connect the power connector on the X2 end to the external power supply port, as shown in
Figure
Issue 08 (2015-01-15)
Route the cable, and then use a cable tie to bind the cable. For details, see
Requirements for Cable
Label the installed cable. For details, see section
Figure 5-37.
5-37.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Layout.
8.3 Attaching an L-Shaped
5 Installing an RHUB3908
5.4.1
Label.
43