Checking The Prru3901 Hardware Installation - Huawei DBS3900 Installation Manual

LampSite
Installation Guide
Tighten the feeder close to the type N connector to ensure that the jumper is not tightened. In
this way, the connectors on both ends of a jumper are not affected by the external force.
Figure 6-31 Installing jumpers between the pRRU3901 and external antennas
----End
Follow-up Procedure
1.
2.

6.6 Checking the pRRU3901 Hardware Installation

pRRU3901 hardware installation checking includes hardware and cable installation checking.
Table 6-8
Table 6-8 Hardware installation checking list
No.
1
2
3
4
Issue 08 (2015-01-15)
NOTICE
Route the cable, and then use a cable tie to bind the cable. For details, see
Requirements for Cable
Label the installed cable. For details, see section
lists the hardware installation checking items.
Item
Ensure that the pRRU3901 is not grouned.
The position for each device conforms to the engineering design and meets the
space requirement.
Ensure that the pRRU3901 is properly installed.
The surface of the pRRU3901 is neat and clean. The external paint is intact. The
labels, tags, and nameplates are correct, legible, and complete.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Layout.
8.3 Attaching an L-Shaped
6 Installing a pRRU3901
6.5.1
Label.
84