L2Vpn Enable; Mtu - HP FlexFabric 12500 Command Reference Manual
Routing switch series, mpls
Hide thumbs
Also See for FlexFabric 12500:
- Configuration manual (402 pages) ,
- Network management and monitoring command reference (320 pages) ,
- Command reference manual (154 pages)
Table of Contents
Advertisement
l2vpn enable
Use l2vpn enable to enable L2VPN.
Use undo l2vpn enable to disable L2VPN.
Syntax
l2vpn enable
undo l2vpn enable
Default
L2VPN is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
You must enable L2VPN before configuring other L2VPN settings.
Examples
# Enable L2VPN.
<Sysname> system-view
[Sysname] l2vpn enable
mtu
Use mtu to configure an MTU for PWs established on a cross-connect.
Use undo mtu to restore the default.
Syntax
mtu mtu
undo mtu
Default
A PW has an MTU of 1500 bytes.
Views
Cross-connect view
Predefined user roles
network-admin
mdc-admin
Parameters
mtu: Specifies an MTU value in the range of 328 to 65535.
134
Advertisement
Table of Contents
