HP FlexFabric 12500 Command Reference Manual page 39

Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. The command displays LDP LSP information for the specified VPN. If you do not
specify a VPN instance, the command displays LDP LSP information for the public network.
destination-address mask-length: Specifies an FEC by an IP address and a mask length in the range of 0
to 32. If you do not specify a FEC, the command displays information about LDP LSPs for all FECs.
Examples
# Display LDP LSP information for the public network.
<Sysname> display mpls ldp lsp
Status Flags: * - stale, L - liberal
Statistics:
FECs: 4
FEC
1.1.1.1/32
2.2.2.2/32
10.1.1.0/24
192.168.1.0/24
Table 16 Command output
Field
Status Flags
Statistics
FEC
Ingress LSPs: 1
In/Out Label
-/3
1151/3
3/-
-/1151(L)
1149/-
-/1149(L)
1150/-
-/1150(L)
Description
LSP status:
•
•
LSP statistics:
•
•
•
•
Forwarding equivalence class identified by an IP prefix.
Transit LSPs: 1
Nexthop OutInterface
10.1.1.1 GE3/0/2
10.1.1.1 GE3/0/2
*—Stale, indicating the LSP is under a GR process.
L—Liberal, indicating the LSP is not available.
FECs—Total number of FECs.
Ingress LSPs—Number of LSPs that take the local device as the
ingress node.
Transit LSPs—Number of LSPs that take the local device as a transit
node.
Egress LSPs—Number of LSPs that take the local device as the egress
node.
34
Egress LSPs: 3