Description (Vpn Instance View) - HP FlexFabric 12500 Command Reference Manual

Views
BGP view, BGP-VPN instance view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
A VPNv4 address comprises an RD and an IPv4 prefix. VPNv4 routes comprise VPNv4 addresses.
For a PE to exchange BGP VPNv4 routes with a BGP peer, you must enable that peer by executing the
peer enable command in BGP VPNv4 address family view or BGP-VPN VPNv4 address family view.
In BGP VPNv4 address family view, you can configure the following:
BGP VPNv4 route attributes, such as the preferred value.
•
Whether to allow the local AS number to appear in the AS_PATH attribute of received route
•
updates.
The settings in BGP VPNv4 address family view control VPNv4 route exchange between PEs.
The settings in BGP-VPN VPNv4 address family view control VPNv4 route exchange between provider PE
and provider CE in nested MPLS L3VPN.
Examples
# Create the BGP VPNv4 address family and enter its view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] address-family vpnv4
[Sysname-bgp-vpnv4]
# Create the BGP-VPN VPNv4 address family and enter its view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ip vpn-instance vpn1
[Sysname-bgp-vpn1] address-family vpnv4
[Sysname-bgp-vpnv4-vpn1]

description (VPN instance view)

Use description to configure a description for a VPN instance.
Use undo description to delete the description.
Syntax
description text
undo description
Default
No description is configured for a VPN instance.
Views
VPN instance view
60